In the process of processing, soot and other materials will shorten the service life of the CNC cutting machine. The entire CNC cutting machine is composed of condenser, filter, dust-proof net and other components. CNC flame cutting machine steel and low alloy steel with carbon equivalent greater than 0.4% can be cut by preheating. As the proportion of metal elements increases, cutting will become more and more difficult. Therefore, chromium steel, nickel or silicon metal, cast steel and other materials without special protection methods are not suitable for oxygen cutting, and other processing methods should be used for thermal cutting.

  First, the method of cleaning the condenser is suitable for the CNC cutting machine system. The best cooling capacity is to use a condenser for cooling, which can instantly cool the temperature of the processed materials and equipment. Remove them, then wash them with detergent, then wipe them dry and wash.

  Second, the cleaning method of the filter. The filter is used to filter the waste generated by the CNC cutting machine. The requirements for production efficiency, reduction of production costs and high intelligent active cutting functions are also increasing. The development of CNC cutting machine must meet the requirements of the development of modern machining industry. The portable cutting machine has a cantilever structure and can be equipped with flame cutting or plasma cutting. It is a high-efficiency and energy-saving cutting equipment. It is suitable for cutting and blanking various carbon steel, stainless steel and non-ferrous metal plates. The horizontal effective cutting width is 1.2m, and the pre-effective cutting length is 2.0m. It is the lightest and most economical CNC cutting machine and an updated product of the analog cutting machine. It has the functions of active combustion and electric height adjustment. Then clean and replace the filter element.

  Third, the dust-proof net cleaning method: dust-proof net. For equipment processing CNC cutting machines, there will be dust-proof equipment and then dust-proof nets. When dealing with the cleaning plan, first use an air gun to clean the dust above the dust screen, and then clean it with a neutral detergent. Remember that it must be neutral, otherwise chemical reactions will easily occur and cause corrosion.